Our Auditors, Surveyors, Inspection Engineers Trainers and Competent persons are Having
- Versatile Audits & Projects Experience
- Project QA/QC Experience
- Prompt communication Practice
- Case Study and evaluation
- Service in the provision of Pipe mill and coating Inspection services.
- The experience of our personnel, coupled with the use of Knowledge on Codes and standards
We provide Comprehensive Independent Inspection for all Industrial establishments, specially Power, Process, Oil & Gas, Civil/NHAI road construction, Textile, Agro, Renewable Energy segments and not limiting to Size and Engineering Spectrum.
Though Enmag Sys is having its own Inspection procedure and reporting formats, Enmag Sys can perform Inspection as per client specified ITP / QAP stages and report in the format prescribed by the client
Our Procurement Assistance team supports in auditing, evaluation and assessment of supplier’s facilities and quality management system. This service can be tailored to comply with any standard of our client requirement.
With an extensive network of experienced Pipe mill and coating Inspection personnel available on rolls, we provide first class latest technologies and specialist training, ensuring to provide our clients with the very best levels of quality of service and turnaround of information.
Specifications
- Procure of MS steel as per IS-2062-2006 (SAIL)
- Tank fabrication as per IS-10987:1992
- All the tank nozzle flanges as per ASA-150 Class.
- Tankmastic is a maultipurpose, anti-corrosive black bituminous coating & is coverd by IS-9862/1981. it is an anti corrosive, tasteless, odourless, non tonoxic & black bituminous coating, compounded to a special formula for protecting the external surface of storage tanks, pipes etc agaisnt corrosion.
- Welding Electrodes as per IS-814:1991
- Welding shall be according to IS-812: 1987
- Painting as per IS-158
Asphalitic Roofing P-2040
Pump: Model No: RT-80 HBCI 3 L
Test Standard: VDMA 24284 Gr. II Cl. II
Pressure : 6Kg/CM2, Speed: 1440 RPM,
Flow Rate: 80LPM, Power : 1.36KVA
Motor: FLP IS-2148 – III Phase Induction Motor
IS-1239(Part-1)
“
“
“
IS-318 Gr. LTB2
“
IS-318 Gr. LTB2
“
as per standard
“
“
As per Morth Section 2600, Clause 2605, IS : 10733-1983
“Weather Proof (IP 55 Rating)”
IS:318 Gr.LTB2
IS-2148:2004
“Mounting Vertical type
- Model NO: SDN 104
- Float Material : SS316″
IS 1554 Part – 1 / 1994
IS 1554 Part – 1 / 1994
“Dial : 4″”,
Range 0 to 10Kg/CM2, SS-316 or SS-304″
Standard